- Images & logos are linked to high quality larger files to suit publication. File size may be up to 1MB.
- All material here is free to use for publication to promote the products or services as shown.
- If any material here is published, PR Driven would greatly appreciate an email to let us know which magazine and the release date, thank you.
Captain America Gas Tank drink dispenser     |
 |
| The Movie Easy Rider popularised the chopper culture and created an industry around customised bikes and the freedom they evoke. In 1969 the bike which was known as Captain America became an unlikely star in the Easy Rider movie, nearly 40 years later the chopper bike scene experienced a revival with customisers having access to new materials and technology allowing the boundaries to be pushed to the limit. Still in today’s modern customising renaissance the Captain America chopper is revered and many replicas are being produced. So much is the appeal of the symbol that helmets and Jackets are also available. For the first time the symbol of freedom and rebellion that is the Captain America chopper is available to every one with the latest release from Ceramic Innovations, the Gas Tank from Captain America has been faithfully reproduced as an Eclectic Vessel that will take pride of place in any bar. Capable of holding around 3 litres of your favourite spirit or liquor this awesome centre piece will be a talking point for many years. Standing proud on any bar, office or shed the symbol of defiance and freedom is proudly mounted on a chrome stand with solid black base. This stunning piece is built to last with a triple fired ceramic construction fully glazed and embossed with the iconic stars and stripes decals to create an authentic look. The pewter petrol cap features the American Eagle, and a fully functional tap dispenses your favourite beverage. This is sure to appeal to the freedom rider in your family, or for those who dream of the open road with a sense of adventure. To obtain your piece freedom for only $250 plus $15 postage and handling, visit www.ceramicinnovations.com.au or phone Ceramic Innovations direct on 03 9555 9011 |
www |
Aunger Performance Wipers   |
 |
| Windscreen wipers are usually forgotten about until it rains; yes, they perform a necessary function, but they do little to enhance the look of the car. Aunger have a range of wipers which will change all that. The Aunger Performance Series wiper blade range is designed to fit any vehicle, whether locally manufactured or imported, and are available in red, blue or silver finish. All new to the range is a chrome finish wiper blade which is functional and fashionable and will look at home on any performance vehicle. Complete with an integrated aerodynamic spoiler, the newly designed blade, adds strength and reduces lift, while providing valuable street-cred with its ultra cool and modern good looks. The included graphite coated refills provide smooth wiping and enhanced visibility in even the most demanding of conditions. The Aunger wiper range now includes High Performance Silicone refills. Silicone offers an ultra smooth action and the friction modifier coating ensures silent operation. The High Performance Silicone Refills are available in blue, red, yellow, clear, grey and purple. Three new colours have been added to the High Performance Silicone range: Jet Black, Green Glow and Hot Pink, which add a wild look while performing an important function. The all new silicone wipers will fit most cars and are resistant to UV rays, oils, salt, chemicals and extreme temperatures. They will not crack, fade, split or dry out and will outlast ordinary refills by miles. Supplied with a universal fitting kit and easy to follow fitment guide, the Aunger Performance Series wipers are available in 16, 18, 20 and 22" sizes and are available now from all good auto parts stores Australia wide. For more information contact Aunger on 07 3260 2400 or visit www.aunger.com.au |
|
UltraRide Suspension        |
 |
| UltraRide announces the launch of a completely new range of shock absorbers and suspension components onto the Australian market. UltraRide offers motorists superior ride handling with the latest innovations in suspension technology and is available to suit most makes and models on Australian roads. UltraRide is now available through an established network of dealers in most states and offers an Australia-wide warranty and fitment by experience companies. The UltraRide range has been developed over many years and is aimed at providing the best products demanded by Australian motorists. The Australian made UltraRide springs are manufactured using the highest quality Australian steel combined with the latest technology such as tapered wire and progressive rate springs. The UltraRide range includes raised, standard, low and super-low springs with shock absorbers to match to ensure the best handling available. Many years of research and development has been invested in the design of the UltraRide shock absorbers which has resulted in an ultra smooth ride and extra ride sensitivity. The shock piston will move up and down slowly in normal driving conditions providing a soft and comfortable ride, hit the corners or brakes hard and the shock absorber will instantly firm up allowing the driver excellent control and stability in an emergency situation. Superior ride and handling are achieved through specially developed bump and rebound valve springs and UltaRide’s unique 4 stage multi-lip seal. This outstanding seals allows the shock absorber to operate with less gas pressure giving the drive a smooth feel in all conditions. Commodore owners can now fit massive 20 inch rims thanks to UltraRide. A front strut has been specifically designed with a higher spring seat providing clearance and eliminating tyre rubbing. For other car owners a full range of spring and shock packages are available with each component design to work efficiently together. A large range of shortened body shocks have been designed to work correctly on lowered vehicles and at the other end of the spectrum a full range of lift kits is available for 4WD owners. Dealers will be able to provide accurate and quick information to customers using the unique and innovative UltraRide catalogue. The 500 page catalogue provides a detailed inventory of all the available fitments for springs and shocks in the one place. Designed to be easy to use and understand, the catalogue will become an essential guide to all stockists. UltraRide produce a complete range of coil springs, leaf springs, shock absorbers, bushes and suspension accessories. For further details on the UltraRide range, contact Motoline 03 9756 3700. |
|
Heavy Duty Compressors    |
|
| Australia’s leading automotive aftermarket protection and accessories company, Aunger, has released a range of 12 Volt air compressors to suit all needs. For the tradesman, hobby farmer or home handyman the AAC 142, Titan Heavy Duty Compressor and Zeus Heavy Duty Compressor models provide serious air. Starting with a heavy duty construction and a 35 litres per minute capacity the AAC 142 model has the capacity to run most air tools and inflate tyres on most vehicles. The AAC 142 comes complete with a 150 psi pressure gauge and 12 Volt battery clips for easy connection. The larger Titan Heavy Duty Compressor is ideal for heavy duty work and will inflate a 4X4 tyre from 15 psi to 32 psi in around a minute. Pumping out up to 90 litres per minute the Titan provides the volume to handle any need. The Titan features stainless steel valves and a high performance PTFE piston ring. An alloy base tray with anti-vibration rubber feet ensures stable operation. Complete with 10 metre coiled cord, lightweight storage case and battery clips, the Titan is ready for work anywhere. For those who demand more, the Zeus Extra Heavy Duty compressor delivers with 150 litres-per-minute volume and large double cylinders. Heavy duty construction, stainless steel valves and PTFE piston rings ensure hours of trouble free operation. Features include an automatic built-in thermal cut-off switch, alloy base tray with anti-vibration feet, 10 metre extendable coiled hose and 150 psi pressure gauge. Ideal for the sportsperson, all the Aunger High Volume Compressors come complete with three sports equipment adaptors to ensure they are ready for any action. The Aunger High Volume Compressors are a must for all vehicles and 4x4s as well as bicycles and sports equipment. For more information contact Aunger on 07 3260 2400 or visit www.aunger.com.au |
|
KOULtools   |
 |
| Since the invention of stainless braided rubber hose, racers and mechanics have been fighting the problem of installing frayed hoses into the socket part of the assembly. If you’re lucky and get a clean cut on the end of the hose, you might get it in. Most of the time a little fuzz appears on the hose end where the cut has been made and the battle begins. The small metal barbs make it difficult to fit the hose into the socket, which is time consuming and it can get bloody. KOULtool is a new device which provides the solution and makes the assembly a snap. KOULtools are simple to use and will save time and fingers from the frayed ends of a braided hose. After choosing the correct KOULtool for your fittings socket size, simply place the socket and adaptor (if required) into the KOULtool and clamp it into a vice. Lube the conical entrance and twist the hose into the socket, then check to see if the hose is in position. In less than 10 seconds you have it assembled and if required you can repeat the process several times without the need to re-cut the hose end. Manufactured of a high tech composite, the KOULtool is virtually indestructible with no need to worry about vice marks or the tool wearing out. The tool can pay for itself the first time you don't have to scrap some expensive hose because it got too short trying to clean up the end. And you will be amazed at the amount of time you save. After using this tool, you will say to yourself, "KOUL". The KOULtool is available in 2 kits, each kit contains three sizes, a complete set of instructions and is a must for any engine builder or workshop. For more information contact Crane Technologies on 08 8363 5566 |
|
T-Max     |
|
| Aunger and T-Max combine to give 4WD owners better value.
Australia’s leading automotive accessory company, Aunger, has announced the acquisition of the T-Max brand and has become the exclusive importer, manufacturer and distributor of the T-Max brand in Australia and New Zealand.
T-Max Products include a range of high-performance off-road recovery winches, straps and equipment that are designed and tested in Australia to meet stringent quality requirements and relative Australian Standards. The T-Max range of winches and accessories is proof that premium prices are not required for high quality recovery equipment. The range currently includes powerful electric winches to take the heaviest loads, air compressors for fast inflation and recovery gear including snatch straps, winch extension straps, shackles, tow hooks, high lift jacks, chain kits and much more. Toolboxes, heavy-duty tarps and other accessories ensure all needs are catered for. “Aunger have big plans for the T-Max range and we are very excited by the opportunities ahead” says Director Richard Frappell, “We will utilise our extensive distribution network to make sure every 4WD owner has access to this great range. The T-Max range will be made available nationally across Australia and New Zealand.” Look for the full range of T-Max products at leading 4WD accessory stores and major automotive accessory outlets. For more information contact Aunger on 07 32602400 or visit www.aunger.com.au |
|
Peter Brock Seat Covers      |
|
| There is one name that is more synonymous with Australian motor sport than any other. It is, of course, Peter Brock. There is no argument that Brock is an icon of Australian touring car racing.
Throughout the '70s and '80s Brock became a legend for his success on the racetrack, but it was more than just his on-track performances which created the 'People's Hero'. He is always approachable and regularly found the time to sign the countless autographs requested by his enormous throng of fans. It is well documented that Brock went on to win Australia's Greatest Race nine times, the first being in the mighty Torana XU-1 in 1972.He also won the Australian Touring Car Championship three times (1974, '78 and '80) and he was runner-up on no less than five occasions. He claimed victory at the Sandown 500 nine times as well as a string of other results in non-circuit events, such as the Australian Safari and Targa Tasmania. He also raced overseas at famous endurance races like the LeMans and Spa 24-Hour classics. Peter Brock fans can now show their support wherever and whenever they cruise in their cars thanks to the new range of Brock seat covers from Aunger. A variety of styles and colours are available to suit most car interiors and tastes. If you are a Brock fan but don’t drive a Holden don’t worry you haven’t been forgotten, the unique Aunger fitting system allows the Brock car seat covers to fit most cars on the road, which makes sense as Peter did race a variety of marques during his career including Toranas, Commodores, Falcons , Monaros, Porsches and even a Volvo. During his Career Peter become a household name thanks to his 10 wins at Bathurst and dominance in the Australian Touring Car Championship. The Peter Brock seat covers are produced using premium quality fabric with extra padding for increased driver comfort. The unique padded sides enhance the racing style and fit. Front bucket seat covers and rear bench seat covers are available; each Brock seat cover is emblazed with Peter’s signature and features the famous 05 number. Peter was personally involved with the development and approval of the final designs, including the packaging. The Peter Brock Seat Cover range is available from all leading automotive accessory retailers. For more information contact Aunger on 07 32602400 or visit www.aunger.com.au |
|
The Fast and the Furious        |
|
| A complete range of The Fast And The Furious car accessories has been released by leading car accessory company Aunger. Officially licensed by Universal Studios the new range features ‘The Fast And The Furious’ and ‘2 Fast and 2 Furious’ logos. Seat Covers, Steering Wheel Covers, Floor mats and Seat Belt Pads set the pace emblazed with either ‘The Fast And The Furious’, or ‘2 Fast And 2 Furious logos’. Available in blue or red this range is sure to make an impact to the sporty look of any car. Colour matched wiper blades, gear knobs; sub woofer and speaker rings enhance The Fast And Furious look. The neon range completes the look and feel of the car and ensures you get noticed in any crowd. LED illuminated gear shift knobs, speaker rings and flexible neon wire create a wild atmosphere and look to the interior of the car, while undercar neon’s, LED illuminated valve caps and LED illuminated exhaust tips complete the awesome street smart look on the outside. For the ultimate fast and furious ride black light flex with a black light tube create a wild look and atmosphere in the car. The flex is applied to any surface in the car and remains unseen until the black tube is turned on. With the black light tube on the flex is illuminated creating an amazing look. To protect your 2 Fast and 2 Furious DVD’s and CD’ a range of Disc wallets and folders are also available. For further information or the location of your nearest stockist call 07 3260 2400 or visit www.aunger.com.au |
|
A.drive R1 Performance enhancing rubber for your car is the simplest way to describe the transformation created by Yokohama’s new performance tyre - the A.drive R1. The awesome handling and braking characteristics of the A.drive R1 will provide the finishing touch to the performance enhancement of most cars. Nothing adds performance credibility like a nice big set of rims, but fitting substandard rubber will expose the pretenders and performance credibility easily vanishes.Drivers of compact sports cars, 4 cylinder and small 6 cylinder cars who want to step up to another performance level need to ensure the extra power and control desired is not lost with inferior road grip. Performance gains will only be realised if the correct tyre choice is made, the A.drive R1 is perfect for plus-fitment and will improve handling and stopping while providing the ultimate sporty look. To complete the performance enhancement, the look must be right. The A.drive R1 range features a stunning sidewall design which complements the aggressive tread style to create a tyre with the look and the performance to back it up. Yokohama’s exclusive tread pattern design with ‘Active Handling Control’ delivers true driving pleasure, high responsive cornering and superior wet weather grip. An exciting sport directional tread pattern based on a centre rib for stability and a combination of large shoulder blocks and 4 straight grooves offers high rigidity, maximum performance and unparalleled safety through uncompromising technology. The A.drive R1 can lift the performance of an otherwise standard car and offers a level of quality and technology normally reserved for more expensive tyres. With a speed rating of up to 270 km/h (W rating) the A.drive R1 delivers more than most will ever need and ensures a greater level of safety in high demand situations. Available to suit 16, 17 and 18 inch rims with a variety of fitments the A.drive R1 is the first choice for the serious performance motorist. The Yokohama A.drive R1 is now available at your local Tyres & More, Bob Jane T-Marts, Yokohama Premium Dealers and all good tyre retailers. For more information or the location of your nearest stockist visit www.yokohama.com.au |
Promote YOUR product or service to a captive audience. Contact 0407 007 286 for details